Bidford-on-Avon, Warwickshire. Mon to Fri.01789 224228

TCI Products · About

How we're put together, and how a job actually flows through.

TCI is a Warwickshire silicone moulding company. Four specialist divisions in one workshop, sharing one engineering team and one quality system.

Our people

The people behind every TCI mould.

The same small team works across all five TCI brands, so the person who quotes your job is never far from the person who builds it.

Thomas Lane, Managing Director at TCI

Thomas Lane

Managing Director

Runs TCI Group and sets the direction for all five brands. On larger or unusual projects, Thomas is usually part of the conversation.

George Preston, Design and Project Manager at TCI

George Preston

Design & Project Manager

Turns your drawing, sketch or sample into a mould design, then keeps the project moving from first idea to sign-off.

Kelly Ballinger, Head of Partnerships at TCI

Kelly Ballinger

Head of Partnerships

Looks after the businesses we work with over the long term, from the first enquiry through to repeat orders.

Jim Anderton, Production Manager at TCI

Jim Anderton

Production Manager

Runs the workshop floor, plans each build and makes sure the first parts from each tool are measured against the drawing.

Theodore, Employee Welfare at TCI

Theodore

Employee Welfare

Our cocker spaniel. Keeps spirits up in the office and gives every delivery a thorough sniff.

Meet the team

One workshop, four front doors

Four brands, one engineering team behind them.

Techcraft Industries Mouldings Ltd trades as TCI Mouldings, TCI Construction and TCI Products, with TCI Culinary run by Techcraft Industries Culinary Ltd, all under the TCI Group so that specialist customers land on specialist content. The engineering, the workshop and the quality system are shared. A chandler and a precast yard get very different sites — because they're chasing very different outcomes — but they get the same team.

TCI Products quotes tooling and unit cost as two separate lines, so you can see what the tool costs to make and what each part costs once it's running. Nothing hidden inside a per-part number that makes the first order look cheap and the fifth one painful.

Measuring a moulded rubber hose with digital callipers

How a job flows

From first enquiry to a running tool.

  1. 01

    Enquiry

    A drawing, a photograph, or a paragraph. We usually reply within one working day with a route recommendation. Where we can, we'll give you an early idea of cost.

  2. 02

    Design and DFM

    The mould is designed around the part. Draft, parting lines, vents, and how it comes off the pattern.

  3. 03

    Pattern and tool

    Master pattern machined, printed or sculpted. Silicone poured, pressed or injected around it, depending on route.

  4. 04

    First-off approval

    You get first-off parts to sign off. Any changes are made before we call the tool released.

  5. 05

    Run and reorder

    You take the tool, or leave it with us and reorder parts. Either way, the paperwork is your permanent record of what the mould is.

Black moulded rubber component
Black moulded rubber component
Designed and developed in the UK. Compression moulding and LSR on our own presses, with other work through our partner network. We'll confirm where your parts are made on your quotation.

Get in touch

Tell us the part, the volume, and the timeline.

Rough annual volume, target unit price, and any deadlines. That's enough to work out whether compression, LSR injection or something else is the right tool.

Real people, a real workshop

You deal with the people who make it.

No call centre and no middlemen. When you contact TCI Products, you speak to the team who design, build and check your mould.

  • A real Warwickshire workshopUnit 15, Waterloo Park, Bidford-on-Avon, Alcester B50 4JG.
  • Real people on the phoneCall the team on 01789 224228, Monday to Friday.
  • The same team on every jobDesign, production and aftercare come from the people you see here.
  • Part of TCI GroupFour specialist divisions under TCI Group, one engineering team. Visit TCI Group.
Representative image: moulds on the bench mid-build.
Representative image: moulds on the bench mid-build.
Representative image: a stack of silicone moulds.
Representative image: a stack of silicone moulds.
Representative image: a design and project office.
Representative image: a design and project office.
  • Thomas LaneManaging Director
  • George PrestonDesign & Project Manager
  • Kelly BallingerHead of Partnerships
  • Jim AndertonProduction Manager
  • TheodoreEmployee Welfare
Meet the team