Bidford-on-Avon, Warwickshire. Mon to Fri.01789 224228

Post-processing and finishing · Inspection and kitting

Inspection and kitting.

Parts arriving checked, counted and packed the way your line uses them save your goods-in team hours.

InspectionVariant
Post-processing and finishingParent route
DocumentedMaterial declaration

The detail

The last step matters

A good part packed badly can arrive distorted, mixed with the wrong part or impossible to count. Inspection and kitting close the loop between the press and your production line.

We inspect against agreed criteria, count by weight or by hand, and pack in bags, trays, kits or retail packaging, each labelled with the batch reference.

Machined metal parts

Where it fits

What we offer

Inspection

Visual and dimensional checks against agreed criteria.

Kitting

Multiple parts assembled into kits.

Packing

Bulk, bagged, trayed or retail-ready.

Illustrative example: Inspection tools, sorted silicone parts and assembled kits on a bench
Inspection, sorting and kitting at the bench

How we run it

How it works

  1. Criteria agreed

    Limit samples and checks agreed with you.

  2. Inspection

    Parts checked and recorded.

  3. Counting and kitting

    Counted and kitted as required.

  4. Labelling and dispatch

    Batch-labelled and shipped.

To quote it

To set it up

01

Inspection criteria

What counts as a defect.

02

Packing format

How your line uses the parts.

03

Labels

Your label format and codes.

04

Kitting list

Which parts go together.

Questions

What people usually ask.

Do you provide inspection reports?

We can share the results of our first-off check against your drawing. Anything further is agreed on your quotation. See our quality approach.

Can you pack into our retail packaging?

Yes. See branded parts.

Keep exploring

More from post-processing and finishing.

Cryogenic deflashing

Flash is the thin skin of material left at the parting line. Cryogenic deflashing freezes it brittle and knocks it off, leaving clean edges…

Open this variant

Printing and marking

Logos, legends, part numbers and batch codes. Marking silicone takes the right inks, surface preparation and curing, otherwise it rubs off.

Open this variant

Post-processing and finishing overview

Deflash, trim, print, bond, assemble, inspect and pack. Everything that has to happen between the press opening and the part being ready…

Back to the overview
Designed and developed in the UK. Compression moulding and LSR on our own presses, with other work through our partner network. We'll confirm where your parts are made on your quotation.

Get in touch

Tell us the part, the volume, and the timeline.

Rough annual volume, target unit price, and any deadlines. That's enough to work out whether compression, LSR injection or something else is the right tool.

Real people, a real workshop

You deal with the people who make it.

No call centre and no middlemen. When you contact TCI Products, you speak to the team who design, build and check your mould.

  • A real Warwickshire workshopUnit 15, Waterloo Park, Bidford-on-Avon, Alcester B50 4JG.
  • Real people on the phoneCall the team on 01789 224228, Monday to Friday.
  • The same team on every jobDesign, production and aftercare come from the people you see here.
  • Part of TCI GroupFour specialist divisions under TCI Group, one engineering team. Visit TCI Group.
Representative image: moulds on the bench mid-build.
Representative image: moulds on the bench mid-build.
Representative image: a stack of silicone moulds.
Representative image: a stack of silicone moulds.
Representative image: a design and project office.
Representative image: a design and project office.
  • Thomas LaneManaging Director
  • George PrestonDesign & Project Manager
  • Kelly BallingerHead of Partnerships
  • Jim AndertonProduction Manager
  • TheodoreEmployee Welfare
Meet the team