Bidford-on-Avon, Warwickshire. Mon to Fri.01789 224228

By application · by sector · by product family

Applications and sectors.

We're a contract manufacturer, so our world is defined by yours. Here are the sectors we make parts for, and the kinds of parts each one asks us to make.

8Sectors
ContractManufacturing
Batch traceabilityOn request

Eight sectors we make parts for

Each sector has a different set of concerns. Pick yours.

Assorted moulded rubber and plastic parts laid out
Assorted moulded rubber and plastic parts laid out

We're a contract manufacturer, so we deliberately don't specialise in one industry. What we specialise in is silicone and rubber manufacturing — the same tooling, the same materials, the same processes serve very different sectors, each with its own paperwork, its own tolerance for change, and its own commercial rhythm.

Below are the eight sectors where we do most of our work. If yours isn't here, we probably still fit — contact us and we'll be honest about whether we're the right shop for your part.

Sectors

The eight worlds we ship into most.

Black moulded rubber bevel gear

For OEMs

You're building a product. You need silicone or rubber components inside it. You don't want to run your own moulding line, and you don't want to have to explain the material sciences to a general-purp…

Open this sector
Laboratory microscope on a clean bench

For medical device makers

You're building a device. Silicone is in it. Your notified body or regulatory pathway needs to know what the material is, where it came from, how it was handled, and how you'd prove that if asked. We …

Open this sector
Remote control with moulded rubber keypad buttons

For electronics manufacturers

You're building a device with a sealed enclosure, a tactile keypad, a cable exit, or all three. You need the silicone parts to behave predictably alongside sensitive electronics and to arrive at your …

Open this sector
Colourful silicone phone cases

For consumer brands

You're building a product your customer will hold, wear, or wipe every day. It needs to feel right in their hand, arrive in your packaging, and be the same in the tenth batch as it was in the first. W…

Open this sector
Black moulded automotive components

For automotive tier-2

You supply into a tier-1 that supplies into a car manufacturer. You need silicone or rubber components against a drawing that came down from the OEM, with the paperwork discipline that programme deman…

Open this sector
Busy industrial assembly floor

For industrial assembly

You build machinery, equipment, appliances or industrial assemblies. Somewhere in the bill of materials are silicone or rubber parts — sealing gaskets, cushioning pads, hand grips, cable protection, v…

Open this sector
Small black moulded rubber parts

For wearable tech

Wearables live on skin, in sweat and rain, and in the hands of people who notice every edge. The silicone parts decide how the product feels long after the unboxing.

Open this sector
Coloured rubber rings and seals

For marine and outdoor

Salt spray, UV, freezing nights and hot decks. Outdoor equipment ages faster than anything else we make parts for, so the material choice comes first.

Open this sector
Designed and developed in the UK. Compression moulding and LSR on our own presses, with other work through our partner network. We'll confirm where your parts are made on your quotation.

Get in touch

Tell us the part, the volume, and the timeline.

Rough annual volume, target unit price, and any deadlines. That's enough to work out whether compression, LSR injection or something else is the right tool.

Real people, a real workshop

You deal with the people who make it.

No call centre and no middlemen. When you contact TCI Products, you speak to the team who design, build and check your mould.

  • A real Warwickshire workshopUnit 15, Waterloo Park, Bidford-on-Avon, Alcester B50 4JG.
  • Real people on the phoneCall the team on 01789 224228, Monday to Friday.
  • The same team on every jobDesign, production and aftercare come from the people you see here.
  • Part of TCI GroupFour specialist divisions under TCI Group, one engineering team. Visit TCI Group.
Representative image: a stack of silicone moulds.
Representative image: a stack of silicone moulds.
Representative image: a design and project office.
Representative image: a design and project office.
Representative image: moulds on the bench mid-build.
Representative image: moulds on the bench mid-build.
  • Thomas LaneManaging Director
  • George PrestonDesign & Project Manager
  • Kelly BallingerHead of Partnerships
  • Jim AndertonProduction Manager
  • TheodoreEmployee Welfare
Meet the team