Bidford-on-Avon, Warwickshire. Mon to Fri.01789 224228

Keypads and buttons · Tactile domes and buttons

Tactile domes and buttons.

Some products have one button. It might be the only part of the product people deliberately touch. It has to feel exactly right.

Tactile domesVariant
Keypads and buttonsParent route
DocumentedMaterial declaration

The detail

One button, done properly

Single buttons and domes are small parts with a large influence on how a product feels. The press force, the snap, the travel and the return all come from dome geometry and material hardness.

We sample different dome designs, let you press them, and then lock the chosen design and grade so every batch feels the same.

Illustrative example: Gloved finger testing silicone dome button samples with different shapes

Where it fits

Where they're used

Wearables

Side buttons and controls on bands and devices.

Device controls

Power and function buttons sealed into housings.

Appliances

Sealed buttons on control panels that get wiped daily.

Illustrative example: Silicone buttons fitted into a wearable, device housing and appliance panel
Typical uses for tactile domes and buttons

How we run it

How we tune them

  1. Dome geometry options

    Several dome designs sampled for force and snap.

  2. Hardness selection

    Material chosen alongside the geometry.

  3. Force checks

    First parts measured against the drawing. Actuation force checks on first parts and batches are agreed on your quotation.

  4. Sealing integration

    Buttons designed to seal into your housing where needed.

To quote it

To quote it

01

Housing and switch

The switch under the button changes the feel.

02

Target feel

A reference product helps enormously.

03

Sealing needs

Splash, immersion or dust.

04

Finish

Colour, texture, printed or moulded symbol.

Questions

What people usually ask.

Can you match the feel of an existing button?

Usually, yes. Send a sample and we'll measure it and sample alternatives.

Can buttons be overmoulded onto a backing?

Keep exploring

More from keypads and buttons.

Silicone keypads

A keypad is what people touch every time they use your product. The feel of every key, the legibility of every legend and the seal around…

Open this variant

Backlit keypads

A backlit key needs light to pass through the legend and nowhere else. That takes translucent silicone, opaque coatings and careful control…

Open this variant

Keypads and buttons overview

Silicone keypad mats and moulded buttons with a defined tactile feel, integrated conductive contacts, and graphics either printed on top or…

Back to the overview
Designed and developed in the UK. Compression moulding and LSR on our own presses, with other work through our partner network. We'll confirm where your parts are made on your quotation.

Get in touch

Tell us the part, the volume, and the timeline.

Rough annual volume, target unit price, and any deadlines. That's enough to work out whether compression, LSR injection or something else is the right tool.

Real people, a real workshop

You deal with the people who make it.

No call centre and no middlemen. When you contact TCI Products, you speak to the team who design, build and check your mould.

  • A real Warwickshire workshopUnit 15, Waterloo Park, Bidford-on-Avon, Alcester B50 4JG.
  • Real people on the phoneCall the team on 01789 224228, Monday to Friday.
  • The same team on every jobDesign, production and aftercare come from the people you see here.
  • Part of TCI GroupFour specialist divisions under TCI Group, one engineering team. Visit TCI Group.
Representative image: moulds on the bench mid-build.
Representative image: moulds on the bench mid-build.
Representative image: a stack of silicone moulds.
Representative image: a stack of silicone moulds.
Representative image: a design and project office.
Representative image: a design and project office.
  • Thomas LaneManaging Director
  • George PrestonDesign & Project Manager
  • Kelly BallingerHead of Partnerships
  • Jim AndertonProduction Manager
  • TheodoreEmployee Welfare
Meet the team